Buying building supplies is never an easy task. Whether you are looking to buy pipes or joint compounds you need to buy, you need to ensure that you are purchasing the right product and of good quality. Heading out to Bernardi Building Supplies for all your needs will help to ensure that you make the right decision and get good quality supplies that will last for a long time. Whether you are looking for a premixed or a powdered compound, you will be able to find it there. Today, we are here to tell you about the different types of joint compounds. These compounds have been designed to dry as water evaporates.

Premixed Compound

As the name suggests, it comes pre-mixed which means it is ready to use straight from the packaging. One of the best things about this compound is that you don’t have to worry about getting the consistency right. Everything comes ready in the container. Once you have used the compound, you can always reseal the container to help keep the compound fresh.

Powdered Compound

This type of compound comes in the form of a powder. As the material is powder and doesn’t have any water in it, helps to ensure that it has a longer shelf life even after it has been opened. Before applying it, you will have to mix this powdered compound with water so you can get a good consistency.

Setting Type Joint Drywall Compound

This type of drywall compound dries out with help of a chemical reaction. The setting type joint compound become harder faster than the drying-type compounds. It can set in as less as 20 minutes after the compound has been applied. This helps to finish the project a lot faster as the downtime between coats comes down drastically. The setting type compound has properties that make it immune to shrinking and cracking. If you are looking to complete the project faster then this is the compound that you should opt for. While you are applying the compound you must get a smooth finish as it is harder than sand.

Tapping Compound

When looking to use a compound on the plasterboard joints and internal corners, you should opt for a premix taping compound. One of the advantages of this type of compound is that you don’t need to mix a basecoat. It can do a great job without that as it is much stronger than the most available base coats. The premixed tapping compound doesn’t dry out till it has been applied to the board. 

The compound should be used during warmer temperatures so that it doesn’t dry out till it has been applied completely. As it is an environmentally friendly option, it is a perfect option for larger projects. The premixed taping compound is lightweight. Hence, it is easier to work with. While using this type of compound, you can expect lesser exhaustion and fatigue, especially while working on a large project.

Leave a Reply

Your email address will not be published. Required fields are marked *